diff --git a/lang/gpxsee_cs.ts b/lang/gpxsee_cs.ts index fed70793..d8213399 100644 --- a/lang/gpxsee_cs.ts +++ b/lang/gpxsee_cs.ts @@ -1131,79 +1131,82 @@ OptionsDialog - + + Base color: Základní barva: - + + Palette shift: Posun palety: - + Track width: Šířka cest: - + Track style: Styl cest: - + Tracks Cesty - + Route width: Šířka tras: - + Route style: Styl tras: - + Routes Trasy - - + + Use anti-aliasing Vyhlazovat hrany - + + Line width: Šířka čar: - + Background color: Barva pozadí: - + Paths Trasy - + Map opacity: Neprůhlednost mapy: - + Map Mapa - - + + Graphs Grafy @@ -1258,231 +1261,233 @@ HiDPI režim zobrazení - - + + Width: Šířka: - - + + Style: Styl: - + Waypoint color: Barva navigačních bodů: - + Waypoint size: Velikost navigačních bodů: - - + + Color: Barva: - - + + Size: Velikost: - + Waypoints Navigační body - + POI color: Barva POI: - + POI size: Velikost POI: - + POIs POI body - + + Slider color: Barva posuvníku: - + Points Body - + Moving average window size Velikost okna klouzavého průměru - - + + + Elevation: Výška: - - + + + Speed: Rychlost: - + + Heart rate: Tep: - + + Cadence: Kadence: - + + Power: Výkon: - + + Smoothing Vyhlazování - + Eliminate GPS outliers Odstarnit odlehlé GPS záznamy - - Smoothing: - Vyhlazování: - - - + Automatic Automatická - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Minimální rychlost: - + Minimal duration: Minimální doba trvání: - + Computed from distance/time Vypočítaná ze vzdálenosti/času - + Recorded by device Zaznamenaná zařízením - + Show secondary speed Zobrazit sekundární rychlost - + GPS data GPS data - + DEM data DEM data - + Show secondary elevation Zobrazit sekundární výšku - + UTC UTC - + Use segments Použít segmenty - + Time zone: Časová zóna: - + Elevation Výška - + Time zone Časová zóna - + Filtering Filtrování - + Sources Zdroje - + Pause detection Detekce přestávek - + Radius: Radius: - + Speed Rychlost @@ -1497,226 +1502,229 @@ Projekce vektorových map (IMG a Mapsforge). Projekce musí být platná přes celou oblast mapy. - + Area border width: Šířka okrajů ploch: - + Area border style: Styl okrajů ploch: - + Area fill opacity: Neprůhlednost výplně ploch: - + Fill opacity: Neprůhlednost výplně: - + Areas Plochy - - + + Custom Vlastní - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Vysoké rozlišení - + The printed area is approximately the display area. The map zoom level does not change. Oblast tisku přibližně odpovídá zobrazované oblasti. Přiblížení mapy se nemění. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Přiblížení mapy bude upraveno tak, aby se celý obsah (trasy/body) vešel do oblasti tisku a rozlišení mapy bylo co nejblíže rozlišení tisku. - + Name Název - + Date Datum - + Distance Vzdálenost - + Time Čas - + Moving time Čistý čas - + Item count (>1) Počet objektů (>1) - + Separate graph page Samostatná stránka s grafy - + Print mode Režim tisku - + Header Záhlaví - + Use OpenGL Používat OpenGL - + Enable HTTP/2 Povolit HTTP/2 - + MB MB - + + Image cache size: Mezipaměť obrázků: - + + Connection timeout: Časový limit připojení: - - - + + + System Systém - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Výchozí cesty v dialozích pro výběr souborů. Nevyplňené pole odpovídá výchozímu nastavení systému. - + Data: Data: - + Maps: Mapy: - + POI: POI: - + Initial paths Výchozí cesty - + Appearance Vzhled - + Maps Mapy - + Data Data - + DEM - + Print & Export Tisk a export - + Options Nastavení diff --git a/lang/gpxsee_da.ts b/lang/gpxsee_da.ts index 42044e15..6c0c3c79 100644 --- a/lang/gpxsee_da.ts +++ b/lang/gpxsee_da.ts @@ -1155,17 +1155,19 @@ HiDPI skærmtilstand - + + Base color: Grundfarve: - + + Palette shift: Paletteskift: - + Track width: Sporvidde: @@ -1180,318 +1182,321 @@ - + Track style: Sporstil: - - + + Width: Bredde: - - + + Style: Stil: - + Tracks Spor - + Route width: Rutebredde: - + Route style: Rutestil: - + Routes Ruter - + Area border width: - + Area border style: - + Area fill opacity: - + Fill opacity: - + Areas - - + + Use anti-aliasing Brug anti-aliasing - + Waypoint color: Rutepunktfarve: - + Waypoint size: Rutepunktstørrelse: - - + + Color: Farve: - - + + Size: Størrelse: - + Waypoints Rutepunkter - + POI color: IP farve: - + POI size: IP størrelse: - + POIs Interessepunkter - + + Line width: Linjebredde: - + + Slider color: Skyderfarve: - + Background color: Baggrundsfarve: - + Map opacity: Gennemsigtighed for kort: - + Paths Stier - + Points Punkter - - + + Graphs Grafer - + Map Kort - + Moving average window size Glidende gennemsnitlig vinduesstørrelse - - + + + Elevation: Højde: - - + + + Speed: Hastighed: - + + Heart rate: Puls: - + + Cadence: Kadence: - + + Power: Effekt: - + + Smoothing Udjævning - + Eliminate GPS outliers Eliminer GPS-ekstremværdier - - Smoothing: - Udjævning: - - - + Automatic - + mi/h mil/t - + kn knob - + km/h km/t - - + + s s - + Minimal speed: Mindste hastighed: - + Minimal duration: Minidste varighed: - + Computed from distance/time Beregnet ud fra afstanden/tiden - + Recorded by device Indspillet af enhed - + Show secondary speed - + GPS data - + DEM data - + Show secondary elevation - + UTC - + Use segments - + Time zone: - + Elevation Højde - + Time zone - + Filtering Filtrering - + Sources - + Pause detection Pause genkendelse - + Radius: - + Speed Hastighed @@ -1511,146 +1516,149 @@ - - + + Custom - + mi mil - + nmi sømil - + km km - - + + POI IP - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Højopløsning - + The printed area is approximately the display area. The map zoom level does not change. Det udskrevne område er ca. det samme som visningsområdet. Kortes zoomniveau ændres ikke. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Zoom-niveauet vil blive ændret, således at hele indholdet (spor/rutepunkter) passer til udskriftsområdet og kortopløsning er så tæt som muligt på udskriftsopløsningen. - + Name Navn - + Date Dato - + Distance Afstand - + Time Tid - + Moving time Tid i bevægelse - + Item count (>1) Elementantal (>1) - + Separate graph page Separat grafside - + Print mode Udskrivningstilstand - + Header Toptekst - + Use OpenGL Brug OpenGL - + Enable HTTP/2 Aktiver HTTP/2 - + MB MB - + + Image cache size: Billed cachestørrelse: - + + Connection timeout: Timeout for forbindelse: - - - + + + System System @@ -1665,57 +1673,57 @@ - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: - + Maps: - + POI: - + Initial paths - + Appearance Udseende - + Maps Kort - + Data Data - + DEM - + Print & Export Udskriv & eksport - + Options Indstillinger diff --git a/lang/gpxsee_de.ts b/lang/gpxsee_de.ts index b89dc8ce..e4fd342e 100644 --- a/lang/gpxsee_de.ts +++ b/lang/gpxsee_de.ts @@ -1130,79 +1130,82 @@ OptionsDialog - + + Base color: Grundfarbe: - + + Palette shift: Palettenverschiebung: - + Track width: Streckenbreite: - + Track style: Streckenstil: - + Tracks Strecken - + Route width: Routenbreite: - + Route style: Routenstil: - + Routes Routen - - + + Use anti-aliasing Anti-Aliasing verwenden - + + Line width: Linienbreite: - + Background color: Hintergrundfarbe: - + Paths Pfade - + Map opacity: Kartendeckkraft: - + Map Karte - - + + Graphs Graphen @@ -1257,231 +1260,233 @@ HiDPI-Anzeigemodus - - + + Width: Breite: - - + + Style: Stil: - + Waypoint color: Wegpunkt-Farbe: - + Waypoint size: Wegpunkt-Größe: - - + + Color: Farbe: - - + + Size: Größe: - + Waypoints Wegpunkte - + POI color: POI-Farbe: - + POI size: POI-Größe: - + POIs POIs - + + Slider color: Schieber-Farbe: - + Points Punkte - + Moving average window size Fensterbreite des gleitenden Mittelwerts - - + + + Elevation: Höhe: - - + + + Speed: Geschwindigkeit: - + + Heart rate: Herzfrequenz: - + + Cadence: Frequenz: - + + Power: Leistung: - + + Smoothing Glätten - + Eliminate GPS outliers GPS-Ausreißer entfernen - - Smoothing: - Glätten: - - - + Automatic Automatisch - + mi/h mi/h - + kn kn - + km/h km/h - - + + s sek - + Minimal speed: Minimale Geschwindigkeit: - + Minimal duration: Minimale Dauer: - + Computed from distance/time Berechnet aus Entfernung/Zeit - + Recorded by device Aufgezeichnet von Gerät - + Show secondary speed Sekundäre Geschwindigkeit anzeigen - + GPS data GPS-Daten - + DEM data DEM-Daten - + Show secondary elevation Sekundäre Höhe anzeigen - + UTC UTC - + Use segments Segmente Verwenden - + Time zone: Zeitzone: - + Elevation Höhe - + Time zone Zeitzone - + Filtering Datenfilterung - + Sources Datenquellen - + Pause detection Pausenerkennung - + Radius: Radius: - + Speed Geschwindigkeit @@ -1496,226 +1501,229 @@ Wählen Sie die gewünschte Projektion von Vektorkarten (IMG und Mapsforge-Karten). Die Projektion muss im gesamten Kartenbereich gültig sein. - + Area border width: Flächen-Randbreite: - + Area border style: Flächen-Randstil: - + Area fill opacity: Flächendeckkraft: - + Fill opacity: Deckkraft: - + Areas Flächen - - + + Custom Benutzerdefiniert - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Hohe Auflösung - + The printed area is approximately the display area. The map zoom level does not change. Der Druckbereich entspricht ungefähr dem Anzeigebereich. Das Karten-Zoom ändert sich nicht. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Das Karten-Zoom ändert sich so, dass der ganze Inhalt (Strecken/Wegpunkte) in den Druckbereich passen und die Kartenauflösung so nah wie möglich an der Druckauflösung ist. - + Name Name - + Date Datum - + Distance Distanz - + Time Zeit - + Moving time Bewegungszeit - + Item count (>1) Elementanzahl (>1) - + Separate graph page Separate Seite für Graphen - + Print mode Druckmodus - + Header Kopfzeile - + Use OpenGL OpenGL verwenden - + Enable HTTP/2 HTTP/2 verwenden - + MB MB - + + Image cache size: Bild-Cachegröße: - + + Connection timeout: Verbindungs-Timeout: - - - + + + System System - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Wählen Sie die Anfangspfade der Dateiöffnungsdialoge aus. Für die Systemvorgabe lassen Sie das Feld leer. - + Data: Daten: - + Maps: Karten: - + POI: POI: - + Initial paths Anfangspfade - + Appearance Erscheinungsbild - + Maps Karten - + Data Daten - + DEM - + Print & Export Druck / Export - + Options Einstellungen diff --git a/lang/gpxsee_eo.ts b/lang/gpxsee_eo.ts index 4b905212..3fdf6ad0 100644 --- a/lang/gpxsee_eo.ts +++ b/lang/gpxsee_eo.ts @@ -1190,532 +1190,540 @@ - + Track width: Larĝo de vojo: - + Track style: Stilo de vojo: - - + + Width: Larĝo: - - + + Style: Stilo: - + Tracks Vojoj - + Route width: Larĝo de itinero: - + Route style: Stilo de itinero: - + Routes Itineroj - + Area border width: Larĝo de area limo: - + Area border style: Stilo de area limo: - + Area fill opacity: Opakeco de area plenigo: - + Fill opacity: Opakeco de plenigo: - + Areas Areoj - + + Base color: Baza koloro: - + + Palette shift: - - + + Use anti-aliasing Uzi glatigon - + Waypoint color: Vojpunkta koloro: - + Waypoint size: Vojpunkta grandeco: - - + + Color: Koloro: - - + + Size: Grandeco: - + Waypoints Vojpunktoj - + POI color: Koloro de POI: - + POI size: Grandeco de POI: - + POIs POI-punktoj - + + Line width: Linia larĝo: - + + Slider color: Koloro de ŝovilo: - + Background color: Fona koloro: - + Map opacity: Opakeco de la mapo: - + Paths Vojoj - + Points Punktoj - - + + Graphs Grafikaĵoj - + Map Mapo - + Moving average window size - - + + + Elevation: Alteco: - - + + + Speed: Rapideco: - + + Heart rate: Pulso: - + + Cadence: Kadenco: - + + Power: Povumo: - + + Smoothing Glatigo - + Eliminate GPS outliers - - Smoothing: - Glatigo: - - - + Automatic Aŭtomata - - + + Custom Propra - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Minimuma rapideco: - + Minimal duration: Minimuma daŭro: - + Computed from distance/time Komputita de la distanco/tempo - + Recorded by device Registrita per aparato - + Show secondary speed Montri ambaŭ samtempe - + GPS data GPS-datumoj - + DEM data DEM-datumoj - + Show secondary elevation Montri ambaŭ samtempe - + UTC UTC - - - + + + System Sistemo - + Use segments Uzi segmentojn - + Time zone: Horzono: - + Speed Rapideco - + Elevation Alteco - + Time zone Horzono - + Filtering Filtrado - + Sources Datumfontoj - + Pause detection Malkovro de paŭzoj - + mi mi - + nmi nmi - + km km - + Radius: Radiuso: - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Granda distingivo - + The printed area is approximately the display area. The map zoom level does not change. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. - + Name Nomo - + Date Dato - + Distance Distanco - + Time Tempo - + Moving time Movada tempo - + Item count (>1) Nombro de objektoj (>1) - + Separate graph page Grafikaĵo sur aparta paĝo - + Print mode Presa reĝimo - + Header Paĝokapo - + Use OpenGL Uzi OpenGL - + Enable HTTP/2 Ŝalti HTTP/2 - + MB MB - + + Image cache size: Bildkaŝmemora grando: - + + Connection timeout: Tempolimo de konekto: - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: Dateno: - + Maps: Mapoj: - + POI: POI: - + Initial paths - + Appearance Aspekto - + Maps Mapoj - + Data Dateno - + DEM - + Print & Export Preso kaj eksporto - + Options Opcioj diff --git a/lang/gpxsee_es.ts b/lang/gpxsee_es.ts index e7bc3804..c71028a1 100644 --- a/lang/gpxsee_es.ts +++ b/lang/gpxsee_es.ts @@ -1155,17 +1155,19 @@ Modo de pantalla HiDPI - + + Base color: Color de base: - + + Palette shift: Cambiar paleta: - + Track width: Anchura del track: @@ -1190,318 +1192,321 @@ - + Track style: Estilo del track: - - + + Width: Anchura: - - + + Style: Estilo: - + Tracks Tracks - + Route width: Anchura de la ruta: - + Route style: Estilo de la ruta: - + Routes Rutas - + Area border width: Ancho de frontera del área: - + Area border style: Estilo de frontera del área: - + Area fill opacity: Opacidad de relleno del área: - + Fill opacity: Opacidad de relleno: - + Areas Áreas - - + + Use anti-aliasing Usar anti-aliasing - + Waypoint color: Color de puntos de referencia: - + Waypoint size: Tamaño de puntos de referencia: - - + + Color: Color: - - + + Size: Tamaño: - + Waypoints Puntos de referencia - + POI color: Color de POI: - + POI size: Tamaño de POI: - + POIs POI - + + Line width: Anchura de línea: - + + Slider color: Color de señalador: - + Background color: Color de fondo: - + Map opacity: Opacidad del mapa: - + Paths Trayectos - + Points Puntos - - + + Graphs Gráficas - + Map Mapa - + Moving average window size Tamaño medio de la ventana en movimiento - - + + + Elevation: Altitud: - - + + + Speed: Velocidad: - + + Heart rate: Ritmo cardíaco: - + + Cadence: Cadencia: - + + Power: Potencia: - + + Smoothing Suavizar - + Eliminate GPS outliers Borrar valores anormales del GPS - - Smoothing: - Suavizado: - - - + Automatic Automática - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Velocidad mínima: - + Minimal duration: Duración mínima: - + Computed from distance/time Calculado con distancia/tiempo - + Recorded by device Grabado por el dispositivo - + Show secondary speed - + GPS data Datos GPS - + DEM data Datos del MDT - + Show secondary elevation - + UTC - + Use segments - + Time zone: - + Elevation Altitud - + Time zone - + Filtering Filtrado - + Sources Fuentes - + Pause detection Detectar paradas - + Radius: Radio: - + Speed Velocidad @@ -1521,201 +1526,204 @@ - - + + Custom Personalizada - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Resolución alta - + The printed area is approximately the display area. The map zoom level does not change. El área que se imprime es aproximadamente la que muestra la pantalla. La escala del mapa no cambiará. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. La escala del mapa se cambia para que el área impresa se ajuste a todos los elementos (pistas, puntos de referencia...) y la resolución sea lo mas próxima posible a la de impresión. - + Name Nombre - + Date Fecha - + Distance Distancia - + Time Hora - + Moving time Tiempo en movimiento - + Item count (>1) Recuento de elementos (>1) - + Separate graph page Pagina de gráficas separada - + Print mode Modo de impresión - + Header Titulo - + Use OpenGL Usar OpenGL - + Enable HTTP/2 Activar HTTP/2 - + MB MB - + + Image cache size: Tamaño de antememoria de imágenes: - + + Connection timeout: Caducidad de la conexión: - - - + + + System Sistema - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: - + Maps: - + POI: - + Initial paths - + Appearance Apariencia - + Maps Mapas - + Data Fecha - + DEM - + Print & Export Imprimir y exportar - + Options Opciones diff --git a/lang/gpxsee_fi.ts b/lang/gpxsee_fi.ts index 59a771a0..f08b78da 100644 --- a/lang/gpxsee_fi.ts +++ b/lang/gpxsee_fi.ts @@ -1130,79 +1130,82 @@ OptionsDialog - + + Base color: Pohjaväri: - + + Palette shift: Paletin muutos: - + Track width: Jäljen leveys: - + Track style: Jäljen tyyli: - + Tracks Jäljet - + Route width: Reitin leveys: - + Route style: Reitin tyyli: - + Routes Reitit - - + + Use anti-aliasing Käytä reunanpehmennystä - + + Line width: Viivan leveys: - + Background color: Taustan väri: - + Paths Jäljet - + Map opacity: Kartan läpinäkymättömyys: - + Map Kartat - - + + Graphs Kaaviokuvat @@ -1257,231 +1260,233 @@ HiDPI-näyttötila - - + + Width: Leveys: - - + + Style: Tyyli: - + Waypoint color: Reittipisteen väri: - + Waypoint size: Reittipisteen koko: - - + + Color: Väri: - - + + Size: Koko: - + Waypoints Reittipisteet - + POI color: POI:n väri: - + POI size: POI:n koko: - + POIs POI:t - + + Slider color: Liukusäätimen väri: - + Points Pisteet - + Moving average window size Liukuvan keskiarvon ikkunan koko - - + + + Elevation: Korkeus: - - + + + Speed: Vauhti: - + + Heart rate: Sydämen syke: - + + Cadence: Kadenssi: - + + Power: Teho: - + + Smoothing Silotus - + Eliminate GPS outliers Poista poikkeavat GPS-havainnot - - Smoothing: - Silotus: - - - + Automatic Automaattinen - + mi/h mph - + kn kn - + km/h km/t - - + + s s - + Minimal speed: Minimivauhti: - + Minimal duration: Minimikesto: - + Computed from distance/time Laskettu etäisyydestä/ajasta - + Recorded by device Tallennettu laitteella - + Show secondary speed Näytä molemmat samanaikaisesti - + GPS data GPS-tiedot - + DEM data DEM-tiedot - + Show secondary elevation Näytä molemmat samanaikaisesti - + UTC UTC - + Use segments Käytä segmenttejä - + Time zone: Aikavyöhyke: - + Elevation Korkeus - + Time zone Aikavyöhyke - + Filtering Suodatus - + Sources Lähteet - + Pause detection Pysähdysten havaitseminen - + Radius: Säde: - + Speed Vauhti @@ -1496,226 +1501,229 @@ Valitse haluttu vektorikarttojen projektio (IMG- ja Mapsforge-kartat). Heijastuksen on oltava voimassa koko kartan alueella. - + Area border width: Alueen rajan leveys: - + Area border style: Alueen rajan tyyli: - + Area fill opacity: Alueen täytön läpinäkymättömyys: - + Fill opacity: Täytön läpinäkymättömyys: - + Areas Alueet - - + + Custom Käyttäjän määrittämä - + mi mi - + nmi mpk - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Korkea resoluutio - + The printed area is approximately the display area. The map zoom level does not change. Painettu alue on suunnilleen näyttöalue. Kartan zoomaustaso ei muutu. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Zoomaustasoa muutetaan niin, että koko sisältö (jäljet/reittipisteet) sopii painettuun alueeseen ja kartan resoluutio on mahdollisimman lähellä tulostusresoluutiota. - + Name Nimi - + Date Päivämäärä - + Distance Etäisyys - + Time Aika - + Moving time Liikkumisaika - + Item count (>1) Kohteiden määrä (>1) - + Separate graph page Erillinen sivu kaaviokuvalle - + Print mode Tulostustila - + Header Otsikko - + Use OpenGL Käytä OpenGL:ää - + Enable HTTP/2 Ota HTTP/2 käyttöön - + MB Mt - + + Image cache size: Kuvavälimuistin koko: - + + Connection timeout: Yhteyden aikakatkaisu: - - - + + + System Järjestelmä - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: Tiedot: - + Maps: Kartat: - + POI: POI: - + Initial paths - + Appearance Ulkoasu - + Maps Kartat - + Data Tiedot - + DEM - + Print & Export Tulostus & vienti - + Options Valinnat diff --git a/lang/gpxsee_fr.ts b/lang/gpxsee_fr.ts index 14e417e9..aa7106f3 100644 --- a/lang/gpxsee_fr.ts +++ b/lang/gpxsee_fr.ts @@ -1130,79 +1130,82 @@ OptionsDialog - + + Base color: Couleur de base : - + + Palette shift: Incrément de palette : - + Track width: Épaisseur des traces : - + Track style: Style des traces : - + Tracks Traces - + Route width: Épaisseur des routes : - + Route style: Style des routes : - + Routes Routes - - + + Use anti-aliasing Utiliser l'anticrénelage - + + Line width: Épaisseur de ligne : - + Background color: Couleur d'arrière plan : - + Paths Chemins - + Map opacity: Opacité de la carte : - + Map Carte - - + + Graphs Graphe @@ -1257,231 +1260,233 @@ Affichage à haute résolution - - + + Width: Épaisseur : - - + + Style: Style : - + Waypoint color: Couleur des points de jalonnement : - + Waypoint size: Tailles des points de jalonnement : - - + + Color: Couleur : - - + + Size: Taille : - + Waypoints Points de cheminement - + POI color: Couleur des POI : - + POI size: Taille des POI : - + POIs POI - + + Slider color: Couleur du curseur : - + Points Points - + Moving average window size Moyenne glissante de la largeur de fenêtre - - + + + Elevation: Altitude : - - + + + Speed: Vitesse : - + + Heart rate: Fréquence cardiaque : - + + Cadence: Cadence : - + + Power: Puissance : - + + Smoothing Lissage - + Eliminate GPS outliers Supprimer les données GPS aberrantes - - Smoothing: - Lissage : - - - + Automatic Automatique - + mi/h mi/h - + kn nd - + km/h km/h - - + + s s - + Minimal speed: Vitesse minimale : - + Minimal duration: Durée minimale : - + Computed from distance/time Calculée comme distance/temps - + Recorded by device Enregistrée par l'appareil - + Show secondary speed Afficher la vitesse secondaire - + GPS data Données GPS - + DEM data Données MNT - + Show secondary elevation Afficher l’élévation secondaire - + UTC UTC - + Use segments Utiliser des segments - + Time zone: Fuseau horaire : - + Elevation Altitude - + Time zone Fuseau horaire - + Filtering Filtrage - + Sources Sources - + Pause detection Détection des arrêts - + Radius: Rayon : - + Speed Vitesse @@ -1496,226 +1501,229 @@ Choisir la projection des cartes vectorielles (cartes IMG ou Mapsforge). La projection doit être valide sur l'étendue de la carte. - + Area border width: Épaisseur de bord de zone : - + Area border style: Style de bord de zone : - + Area fill opacity: Opacité du remplissage des zones : - + Fill opacity: Opacité de remplissage : - + Areas Zones - - + + Custom Personnalisé - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Résolution élevée - + The printed area is approximately the display area. The map zoom level does not change. La zone d'impression est presque celle affichée. L'échelle reste la même. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. L'échelle est ajustée pour que tout le contenu (traces et points de jalonnement) rentre dans la zone d'impression tout en gardant proches les résolutions d'impression et de carte. - + Name Nom - + Date Date - + Distance Distance - + Time Durée - + Moving time Durée en déplacement - + Item count (>1) Nombre d'éléments (>1) - + Separate graph page Sauter une page pour les graphes - + Print mode Mode d'impression - + Header Entête - + Use OpenGL Utiliser OpenGL - + Enable HTTP/2 Activer l'HTTP/2 - + MB Mo - + + Image cache size: Volume du cache à images : - + + Connection timeout: Délai d'attente de connexion : - - - + + + System Système - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Personnaliser le dossier initial à l'ouverture de fichier. Laisser vide pour le dossier par défaut du système. - + Data: Données : - + Maps: Cartes : - + POI: POI : - + Initial paths Chemins initiaux - + Appearance Apparence - + Maps Cartes - + Data Données - + DEM - + Print & Export Imprimer et exporter - + Options Options diff --git a/lang/gpxsee_hu.ts b/lang/gpxsee_hu.ts index 62dd8484..ce7e9812 100644 --- a/lang/gpxsee_hu.ts +++ b/lang/gpxsee_hu.ts @@ -1174,477 +1174,485 @@ HiDPI megjelenítési mód - + Track width: Nyomvonalak vonalvastagsága: - + Track style: Nyomvonalak stílusa: - - + + Width: Vastagság: - - + + Style: Stílus: - + Tracks Nyomvonalak - + Route width: Útvonalak vonalvastagsága: - + Route style: Útvonalak vonalstílusa: - + Routes Útvonalak - + Area border width: Terület szegélyszélessége: - + Area border style: Területhatár stílusa: - + Area fill opacity: Átlátszóság: - + Fill opacity: Átlátszóság: - + Areas Területek határvonala - + + Base color: Alapszín (egy nyomvonal): - + + Palette shift: Színhasonlóság (továbbiak): - - + + Use anti-aliasing Élsimítás be - + Waypoint color: Köztespont szín: - + Waypoint size: Köztespont méret: - - + + Color: Szín: - - + + Size: Méret: - + Waypoints Köztespontok - + POI color: POI szín: - + POI size: POI méret: - + POIs POI-k - + + Line width: Vonalvastagság: - + + Slider color: Csúszka színe: - + Background color: Háttérszín: - + Map opacity: Térkép átlátszatlansága: - + Paths Utak - + Points Pontok - - + + Graphs Grafikonok - + Map Térkép - + Moving average window size Interpoláció ablakmérete - - + + + Elevation: Magasság: - - + + + Speed: Sebesség: - + + Heart rate: Pulzusszám: - + + Cadence: Ütem: - + + Power: Teljesítmény: - + + Smoothing Grafikon simítása - + Eliminate GPS outliers Kiugró GPS adatok figyelmen kívül hagyása - - Smoothing: - Simítás: - - - + Automatic Automatikus - - + + Custom Egyéni - + mi/h mph - + kn csomó - + km/h km/h - - + + s mp - + Minimal speed: Ennél kisebb sebesség: - + Minimal duration: legalább ennyi ideig: - + Computed from distance/time Számított sebesség - + Recorded by device Az eszköz által rögzített - + Show secondary speed Másodlagos sebesség mutatása - + GPS data GPS adat - + DEM data DEM adat - + Show secondary elevation Másodlagos emelkedés mutatása - + UTC UTC - + Use segments Szakaszok használata - + Time zone: Időzóna: - + Speed Sebesség - + Elevation Magasság - + Time zone Időzóna - + Filtering Részletesség - + Sources Adatforrások - + Pause detection Megállás érzékelés - + mi mérföld - + nmi tengeri mérföld - + km km - + Radius: Láthatóság sugara: - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG Alakhű - + High-Resolution Nagy felbontás - + The printed area is approximately the display area. The map zoom level does not change. A nyomtatott terület megközelítőleg a megjelenítési terület. A térképnagyítás mértéke nem változik. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. A nagyítás mértéke megváltozik, hogy a teljes tartalom (nyomvonal / köztespontok) illeszkedjen a nyomtatott területhez, és a térkép felbontása a lehető legközelebb legyen a nyomtatási felbontáshoz. - + Name Név - + Date Dátum - + Distance Távolság - + Time Idő - + Moving time Mozgásban töltött idő - + Item count (>1) nyomvonalak száma (ha>1) - + Separate graph page A grafikon külön oldalra - + Print mode Nyomtatási mód - + Header Fejléc - + Use OpenGL OpenGL használata - + Enable HTTP/2 HTTP/2 engedélyezése - + MB MB - + + Image cache size: Kép gyorsítótár mérete: - + + Connection timeout: Kapcsolat időtúllépés: - - - + + + System Rendszer @@ -1664,57 +1672,57 @@ Vetület - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Alapértelmezetten megnyíló mappa a lenti elemekhez. Üresen hagyva a mezőt, a program által alapértelmezett. - + Data: Adat: - + Maps: Térképek: - + POI: POI: - + Initial paths Könyvtárak - + Appearance Megjelenés - + Maps Térképek - + Data Adatok - + DEM - + Print & Export Kimenet - + Options Beállítások diff --git a/lang/gpxsee_it.ts b/lang/gpxsee_it.ts index e08102fd..e4ea25fb 100644 --- a/lang/gpxsee_it.ts +++ b/lang/gpxsee_it.ts @@ -1190,532 +1190,540 @@ Modalità di visualizzazione HiDPI - + Track width: Larghezza traccia: - + Track style: Stile traccia: - - + + Width: Larghezza: - - + + Style: Stile: - + Tracks Tracce - + Route width: Larghezza percorso: - + Route style: Stile percorso: - + Routes Percorsi - + Area border width: Larghezza bordo area: - + Area border style: Stile bordo area: - + Area fill opacity: Opacità riempimento area: - + Fill opacity: Opacità riempimento: - + Areas Aree - + + Base color: Colore base: - + + Palette shift: Spostamento tavolozza: - - + + Use anti-aliasing Usa anti-alias - + Waypoint color: Colore punto: - + Waypoint size: Dimensione punto: - - + + Color: Colore: - - + + Size: Dimensione: - + Waypoints Punti - + POI color: Colore POI: - + POI size: Dimensione POI: - + POIs POI - + + Line width: Larghezza linea: - + + Slider color: Colore del cursore: - + Background color: Colore di sfondo: - + Map opacity: Opacità della mappa: - + Paths Percorsi - + Points Punti - - + + Graphs Grafici - + Map Mappe - + Moving average window size Dimensione finestra media mobile - - + + + Elevation: Altitudine: - - + + + Speed: Velocità: - + + Heart rate: Frequenza cardiaca: - + + Cadence: Cadenza: - + + Power: Potenza: - + + Smoothing Smoothing - + Eliminate GPS outliers Elimina outliers GPS - - Smoothing: - Smoothing: - - - + Automatic Automatico - - + + Custom Personalizzato - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Velocità minima: - + Minimal duration: Durata minima: - + Computed from distance/time Calcolata come spazio/tempo - + Recorded by device Registrata dal dispositivo - + Show secondary speed Mostra velocità secondaria - + GPS data Dati GPS - + DEM data Dati DEM - + Show secondary elevation Mostra altitudine secondaria - + UTC UTC - - - + + + System Sistema - + Use segments Usa segmenti - + Time zone: Fuso orario: - + Speed Velocità - + Elevation Altitudine - + Time zone Fuso orario - + Filtering Filtro - + Sources Sorgenti - + Pause detection Riconoscimento pause - + mi mi - + nmi nmi - + km km - + Radius: Raggio: - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Alta risoluzione - + The printed area is approximately the display area. The map zoom level does not change. L'area stampata corrisponde approssimativamente all'area mostrata. Il livello di zoom della mappa non cambia. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Il livello di zoom viene cambiato, in modo che tutto il contenuto (tracce/tappe) rientri nell'area di stampa, e che la risoluzione della mappa sia più vicina possibile alla risoluzione di stampa. - + Name Nome - + Date Data - + Distance Distanza - + Time Tempo - + Moving time Tempo in movimento - + Item count (>1) Numero elementi (>1) - + Separate graph page Pagina separata per i grafici - + Print mode Modalità di stampa - + Header Intestazione - + Use OpenGL Usa OpenGL - + Enable HTTP/2 Abilita HTTP/2 - + MB MB - + + Image cache size: Dimensione cache immagini: - + + Connection timeout: Timeout connessione: - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: - + Maps: - + POI: - + Initial paths - + Appearance Aspetto - + Maps Mappe - + Data Dati - + DEM - + Print & Export Stampa e esporta - + Options Opzioni diff --git a/lang/gpxsee_nb.ts b/lang/gpxsee_nb.ts index c4145bd5..5f57cb2c 100644 --- a/lang/gpxsee_nb.ts +++ b/lang/gpxsee_nb.ts @@ -1155,17 +1155,19 @@ HiDPI-visningsmodus - + + Base color: Grunnfarge: - + + Palette shift: Palettforskyvning: - + Track width: Sporbredde: @@ -1190,318 +1192,321 @@ Utdata - + Track style: Sporstil: - - + + Width: Bredde: - - + + Style: Stil: - + Tracks Spor - + Route width: Rutebredde: - + Route style: Rutestil: - + Routes Ruter - + Area border width: Kantbredde for område: - + Area border style: Kantstil for område: - + Area fill opacity: Ugjennomsiktighet for område: - + Fill opacity: Fylldekkevne: - + Areas Områder - - + + Use anti-aliasing Bruk kanutjevning - + Waypoint color: Veipunktsfarge: - + Waypoint size: Veipunktsstørrelse: - - + + Color: Farge: - - + + Size: Størrelse: - + Waypoints Veipunkter - + POI color: POI-farge: - + POI size: POI-størrelse: - + POIs POI-er - + + Line width: Linjebredde: - + + Slider color: Farge på skyveregulering: - + Background color: Bakgrunnsfarge: - + Map opacity: Kartdekkevne: - + Paths Stier - + Points Punkter - - + + Graphs Diagrammer - + Map Kart - + Moving average window size Flytter gjennomsnittlig kartstørrelse - - + + + Elevation: Høyde: - - + + + Speed: Hastighet: - + + Heart rate: Puls: - + + Cadence: Stegfrekvens: - + + Power: Kraft: - + + Smoothing Utjevning - + Eliminate GPS outliers Eliminer GPS-ekstremverdier - - Smoothing: - Utjevning: - - - + Automatic Automatisk - + mi/h mi/t - + kn kn - + km/h km/t - - + + s s - + Minimal speed: Minimumshastighet: - + Minimal duration: Minimumsvarighet: - + Computed from distance/time Utregnet fra avstand/tid - + Recorded by device Tatt opp av enhet - + Show secondary speed Vis sekundær hastighet - + GPS data GPS-data - + DEM data DEM-data - + Show secondary elevation Vis sekundær høyde - + UTC UTC - + Use segments Bruk segmenter - + Time zone: Tidssone: - + Elevation Høyde - + Time zone Tidssone - + Filtering Filtrering - + Sources Kilder - + Pause detection Sett oppdagelse på pause - + Radius: Radius: - + Speed Hastighet @@ -1521,201 +1526,204 @@ Kartprojeksjon - - + + Custom Egendefinert - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Høyoppløsning - + The printed area is approximately the display area. The map zoom level does not change. Det utskrevne området er omentrent det samme som visningsområdet. Kartforstørrelsesnivået endrer seg ikke. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Forstørrelsesnivået vil endres slik at hele innholdet (spor/veipunkter) passer med utskrevet område, og kartoppløsningen er så lik utskriftsoppløsningen som mulig. - + Name Navn - + Date Dato - + Distance Avstand - + Time Tid - + Moving time Tid i bevegelse - + Item count (>1) Elementantall (>1) - + Separate graph page Separat diagramside - + Print mode Utskriftsmodus - + Header Topptekst - + Use OpenGL Bruk OpenGL - + Enable HTTP/2 Skru på HTTP/2 - + MB MB - + + Image cache size: Bildehurtiglagringstørrelse: - + + Connection timeout: Tilkoblingstidsavbrudd: - - - + + + System System - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Velg forvalgt sti for filåpningsdialoger. La stå tom for systemforvalg. - + Data: Data: - + Maps: Kart: - + POI: POI: - + Initial paths Forvalgte stier - + Appearance Utseende - + Maps Kart - + Data Data - + DEM - + Print & Export Utskrift og ekport - + Options Valg diff --git a/lang/gpxsee_pl.ts b/lang/gpxsee_pl.ts index 2d032899..eb986f32 100644 --- a/lang/gpxsee_pl.ts +++ b/lang/gpxsee_pl.ts @@ -1131,79 +1131,82 @@ OptionsDialog - + + Base color: Kolor podstawowy: - + + Palette shift: Przesunięcie palety: - + Track width: Szerokość śladu: - + Track style: Styl śladu: - + Tracks Ślady - + Route width: Szerokość trasy: - + Route style: Styl trasy: - + Routes Trasy - - + + Use anti-aliasing Użyj wygładzania - + + Line width: Szerokość lini: - + Background color: Kolor tła: - + Paths Ścieżki - + Map opacity: Nieprzezroczystość mapy: - + Map Mapa - - + + Graphs Wykresy @@ -1258,231 +1261,233 @@ Tryb wyświetlania HiDPI - - + + Width: Szerokość: - - + + Style: Styl: - + Waypoint color: Kolor punktów nawigacyjnych: - + Waypoint size: Rozmiar punktów nawigacyjnych: - - + + Color: Kolor: - - + + Size: Rozmiar: - + Waypoints Punkty nawigacyjne - + POI color: Kolor POI: - + POI size: Rozmiar POI: - + POIs Punkty POI - + + Slider color: Kolor suwaka: - + Points Punkty - + Moving average window size Rozmiar okna średniej ruchomej - - + + + Elevation: Wysokość: - - + + + Speed: Prędkość: - + + Heart rate: Tętno: - + + Cadence: Kadencja: - + + Power: Moc: - + + Smoothing Wygładzanie - + Eliminate GPS outliers Wyeliminuj odstające dane GPS - - Smoothing: - Wygładzanie: - - - + Automatic Automatycznie - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Minimalna prędkość: - + Minimal duration: Minimalny czas trwania: - + Computed from distance/time Obliczona na postawie odległości/czasu - + Recorded by device Zapisana przez urządzenie - + Show secondary speed Pokaż średnią prędkość - + GPS data Dane GPS - + DEM data Dane DEM - + Show secondary elevation Pokaż średnią wysokość - + UTC UTC - + Use segments Użyj segmentów - + Time zone: Strefa czasowa: - + Elevation Wysokość - + Time zone Strefa czasowa - + Filtering Filtrowanie - + Sources Źródła - + Pause detection Wykrywanie postoju - + Radius: Promień: - + Speed Prędkość @@ -1497,226 +1502,229 @@ Wybierz żądane odwzorowanie map wektorowych (mapy IMG i Mapsforge). Rzut musi obowiązywać dla całego obszaru mapy. - + Area border width: Szerokość granicy obszaru: - + Area border style: Styl obramowania obszaru: - + Area fill opacity: Nieprzezroczystość wypełnienia obszaru: - + Fill opacity: Nieprzezroczystość wypełnienia: - + Areas Obszary - - + + Custom Niestandardowe - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Wysoka rozdzielczość - + The printed area is approximately the display area. The map zoom level does not change. Wydrukowany obszar jest w przybliżeniu obszarem wyświetlania. Poziom powiększenia mapy nie zmienia się. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Poziom powiększenia mapy zostanie dostosowany w taki sposób, aby cała zawartość (ścieżki/punkty) wchodziła do drukowanego obszaru, a rozdzielczość mapy była jak najbliższa rozdzielczości wydruku. - + Name Nazwa - + Date Data - + Distance Dystans - + Time Czas - + Moving time Czas ruchu - + Item count (>1) Liczba elementów (>1) - + Separate graph page Oddzielna strona wykresu - + Print mode Tryb wydruku - + Header Nagłówek - + Use OpenGL Używaj OpenGL - + Enable HTTP/2 Włącz HTTP/2 - + MB MB - + + Image cache size: Rozmiar pamięci podręcznej obrazu: - + + Connection timeout: Limit czasu połączenia: - - - + + + System System - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: - + Maps: - + POI: - + Initial paths - + Appearance Wygląd - + Maps Mapy - + Data Dane - + DEM - + Print & Export Drukowanie i eksport - + Options Opcje diff --git a/lang/gpxsee_pt_BR.ts b/lang/gpxsee_pt_BR.ts index 5d9ce480..2721d3ca 100644 --- a/lang/gpxsee_pt_BR.ts +++ b/lang/gpxsee_pt_BR.ts @@ -1175,477 +1175,485 @@ Modo de exibição HiDPI - + Track width: Largura da trilha: - + Track style: Estilo da trilha: - - + + Width: Largura: - - + + Style: Estilo: - + Tracks Trilhas - + Route width: Largura da rota: - + Route style: Estilo da rota: - + Routes Rotas - + Area border width: Largura de borda de área: - + Area border style: Estilo de borda de área: - + Area fill opacity: Opacidade de preenchimento de área: - + Fill opacity: Opacidade de preenchimento: - + Areas Áreas - + + Base color: Cor de base: - + + Palette shift: Deslocamento de paleta: - - + + Use anti-aliasing Usar anti-aliasing - + Waypoint color: Cor de waypoint: - + Waypoint size: Tamanho de waypoint: - - + + Color: Cor: - - + + Size: Tamanho: - + Waypoints Waypoints - + POI color: Cor do POI: - + POI size: Tamanho do POI: - + POIs POIs - + + Line width: Largura de linha: - + + Slider color: Cor do cursor: - + Background color: Cor de fundo: - + Map opacity: Opacidade do mapa: - + Paths Caminhos - + Points Pontos - - + + Graphs Gráficos - + Map Mapa - + Moving average window size Tamanho de janela da média móvel - - + + + Elevation: Altitude: - - + + + Speed: Velocidade: - + + Heart rate: Frequência cardiaca: - + + Cadence: Cadência: - + + Power: Potência: - + + Smoothing Suavizar - + Eliminate GPS outliers Eliminar valores atípicos do GPS - - Smoothing: - Suavizar: - - - + Automatic Automática - - + + Custom Personalizada - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Velocidade Mínima: - + Minimal duration: Duração mínima: - + Computed from distance/time Calculada a partir da distância/tempo - + Recorded by device Gravada através de dispositivo - + Show secondary speed Mostrar velocidade secundária - + GPS data Dados de GPS - + DEM data Dados de DEM - + Show secondary elevation Mostrar altitude secundária - + UTC UTC - + Use segments Usar segmentos - + Time zone: Fuso horário: - + Speed Velocidade - + Elevation Altitude - + Time zone Fuso horário - + Filtering Filtragem - + Sources Fontes - + Pause detection Detecção de pausa - + mi mi - + nmi nmi - + km km - + Radius: Raio: - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Alta resolução - + The printed area is approximately the display area. The map zoom level does not change. A área de impressão é aproximadamente a área de tela. O nível de zoom do mapa não é alterado. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. O nível de zoom será alterado de modo que todo o conteúdo (trilhas/waypoints) caiba na área de impressão e a resolução seja tão próxima quanto possível da resolução de impressão. - + Name Nome - + Date Data - + Distance Distância - + Time Tempo - + Moving time Tempo em movimento - + Item count (>1) Número de itens (>1) - + Separate graph page Separar página de gráficos - + Print mode Modo de impressão - + Header Cabeçalho - + Use OpenGL Usar OpenGL - + Enable HTTP/2 Habilitar HTTP/2 - + MB MB - + + Image cache size: Tamanho do cache de imagens: - + + Connection timeout: Tempo de espera de conexão: - - - + + + System Sistema @@ -1665,57 +1673,57 @@ - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: - + Maps: - + POI: - + Initial paths - + Appearance Aparência - + Maps Mapas - + Data Dados - + DEM - + Print & Export Imprimir e Exportar - + Options Preferências diff --git a/lang/gpxsee_ru.ts b/lang/gpxsee_ru.ts index 2b82a4ba..f452ee65 100644 --- a/lang/gpxsee_ru.ts +++ b/lang/gpxsee_ru.ts @@ -1131,79 +1131,82 @@ OptionsDialog - + + Base color: Основной цвет: - + + Palette shift: Смещение палитры: - + Track width: Толщина трека: - + Track style: Стиль трека: - + Tracks Треки - + Route width: Толщина маршрута: - + Route style: Стиль маршрута: - + Routes Маршруты - - + + Use anti-aliasing Применять сглаживание - + + Line width: Толщина линии: - + Background color: Цвет фона: - + Paths Треки - + Map opacity: Прозрачность карты: - + Map Карты - - + + Graphs Графики @@ -1258,231 +1261,233 @@ HiDPI режим отображения - - + + Width: Толщина: - - + + Style: Стиль: - + Waypoint color: Цвет точки: - + Waypoint size: Размер точки: - - + + Color: Цвет: - - + + Size: Размер: - + Waypoints Точки - + POI color: Цвет точки POI: - + POI size: Размер точки POI: - + POIs Точки POI - + + Slider color: Цвет ползунка: - + Points Точки - + Moving average window size Ширины окна усреднения - - + + + Elevation: Высота: - - + + + Speed: Скорость: - + + Heart rate: Пульс: - + + Cadence: Каденс: - + + Power: Мощность: - + + Smoothing Сглаживание - + Eliminate GPS outliers Устранять GPS выбросы - - Smoothing: - Сглаживание: - - - + Automatic Автоматическое - + mi/h мл/ч - + kn уз - + km/h км/ч - - + + s с - + Minimal speed: Минимальная скорость: - + Minimal duration: Минимальная продолжительность: - + Computed from distance/time Вычисленная из расстояния/времени - + Recorded by device Записанная устройством - + Show secondary speed Показывать обе одновременно - + GPS data GPS данные - + DEM data DEM данные - + Show secondary elevation Показывать обе одновременно - + UTC UTC - + Use segments Использовать сегменты - + Time zone: Часовой пояс: - + Elevation Высота - + Time zone Часовой пояс - + Filtering Фильтрация - + Sources Источники - + Pause detection Обнаружение остановок - + Radius: Радиус: - + Speed Скорость @@ -1497,226 +1502,229 @@ Выберите необходимую проекцию для векторных карт (карты IMG и Mapsforge). Проекция должна быть действительна на всей области карты. - + Area border width: Толщина границы области: - + Area border style: Стиль границы области: - + Area fill opacity: Непрозрачность заливки области: - + Fill opacity: Непрозрачность заливки: - + Areas Области - - + + Custom Пользовательскoe - + mi мл - + nmi мор. мл - + km км - - + + POI Точки POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Высокое разрешение - + The printed area is approximately the display area. The map zoom level does not change. Печатная область примерно совпадает с областью отображения. Уровень приближения карты не изменяется. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Уровень приближения будет изменен так, чтобы всё содержимое (треки/точки) уместились в печатную область и разрешение карты было бы как можно ближе к разрешению печати. - + Name Имя - + Date Дата - + Distance Расстояние - + Time Время - + Moving time Время движения - + Item count (>1) Количество объектов (>1) - + Separate graph page Отдельная страница с графиком - + Print mode Режим печати - + Header Заголовок - + Use OpenGL Использовать OpenGL - + Enable HTTP/2 Включить HTTP/2 - + MB МБ - + + Image cache size: Размер кэша изображений: - + + Connection timeout: Таймаут соединения: - - - + + + System Система - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Выберите начальные пути диалогов открытия файлов. Оставьте поле пустым для системного значения по умолчанию. - + Data: Данные: - + Maps: Карты: - + POI: POI: - + Initial paths Начальные пути - + Appearance Внешний вид - + Maps Карты - + Data Данные - + DEM - + Print & Export Печать и экспорт - + Options Параметры diff --git a/lang/gpxsee_sv.ts b/lang/gpxsee_sv.ts index 322f8a36..bfe5e501 100644 --- a/lang/gpxsee_sv.ts +++ b/lang/gpxsee_sv.ts @@ -1130,79 +1130,82 @@ OptionsDialog - + + Base color: Basfärg: - + + Palette shift: Palettskiftning: - + Track width: Spårtjocklek: - + Track style: Spårstil: - + Tracks Spår - + Route width: Ruttjocklek: - + Route style: Ruttstil: - + Routes Rutter - - + + Use anti-aliasing Använd kantutjämning - + + Line width: Linjetjocklek: - + Background color: Bakgrundsfärg: - + Paths Sökvägar - + Map opacity: Kartopacitet: - + Map Karta - - + + Graphs Diagram @@ -1257,231 +1260,233 @@ Högupplöst visningsläge - - + + Width: Bredd: - - + + Style: Stil: - + Waypoint color: Navigeringspunktsfärg: - + Waypoint size: Navigeringspunktsstorlek: - - + + Color: Färg: - - + + Size: Storlek: - + Waypoints Navigeringspunkter - + POI color: POI-färg: - + POI size: POI-storlek: - + POIs POI:er - + + Slider color: Skjutreglagefärg: - + Points Punkter - + Moving average window size Flyttar vanlig fönsterstorlek - - + + + Elevation: Höjd: - - + + + Speed: Hastighet: - + + Heart rate: Hjärtfrekvens: - + + Cadence: Stegfrekvens: - + + Power: Kraft: - + + Smoothing Utjämning - + Eliminate GPS outliers Eliminera GPS-extremvärden - - Smoothing: - Utjämning: - - - + Automatic Automatiskt - + mi/h mi/h - + kn knop - + km/h km/h - - + + s sek - + Minimal speed: Minsta hastighet: - + Minimal duration: Kortast varaktighet: - + Computed from distance/time Beräknad från distans/tid - + Recorded by device Inspelad av enhet - + Show secondary speed Visa sekundär fart - + GPS data GPS-data - + DEM data DEM-data - + Show secondary elevation Visa sekundär stigning - + UTC Utc - + Use segments Använd segment - + Time zone: Tidszon: - + Elevation Stigning - + Time zone Tidszon - + Filtering Filtrering - + Sources Källor - + Pause detection Pausa identifiering - + Radius: Radie: - + Speed Hastighet @@ -1496,226 +1501,229 @@ Välj önskad projektion för vektorkartor (IMG- och Mapsforge-kartor). Projektionen måste vara giltig för hela kartområdet. - + Area border width: Kantbredd för områden: - + Area border style: Kantstil för områden: - + Area fill opacity: Ifyllnadsopacitet för områden: - + Fill opacity: Ifyllnadsopacitet: - + Areas Områden - - + + Custom Anpassat - + mi mi - + nmi nmi - + km km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Högupplösning - + The printed area is approximately the display area. The map zoom level does not change. Det utskrivna området är ungefär detsamma som synligt område på skärmen. Kartans zoomnivå ändras inte. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Zoomnivån kommer att ändras så att hela innehållet (spår/vägpunkter) passar utskriftsområdet och kartresolutionen är så nära som möjligt till utskriftsupplösningen. - + Name Namn - + Date Datum - + Distance Avstånd - + Time Tid - + Moving time Förflyttningstid - + Item count (>1) Objektantal (>1) - + Separate graph page Separat diagramsida - + Print mode Utskriftsläge - + Header Rubrik - + Use OpenGL Använd OpenGL - + Enable HTTP/2 Aktivera HTTP/2 - + MB MB - + + Image cache size: Cashe-storlek för bilder: - + + Connection timeout: Anslutningens tidsgräns: - - - + + + System System - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Välj inledande sökväg för filöppningsdialoger. Lämna fältet tomt för systemstandard. - + Data: Data: - + Maps: Kartor: - + POI: POI: - + Initial paths Inledande sökväg - + Appearance Utseende - + Maps Kartor - + Data Data - + DEM - + Print & Export Utskrift & Export - + Options Alternativ diff --git a/lang/gpxsee_tr.ts b/lang/gpxsee_tr.ts index 1260dd02..ce65eb2a 100644 --- a/lang/gpxsee_tr.ts +++ b/lang/gpxsee_tr.ts @@ -1154,17 +1154,19 @@ HiDPI gösterim modu - + + Base color: Temel renk: - + + Palette shift: Palet değişimi: - + Track width: İz genişliği: @@ -1189,318 +1191,321 @@ Çıktı - + Track style: İz tarzı: - - + + Width: Genişlik: - - + + Style: Tarz: - + Tracks İzler - + Route width: Rota genişliği: - + Route style: Rota tarzı: - + Routes Rotalar - + Area border width: Alan sınır genişliği: - + Area border style: Alan sınır tarzı: - + Area fill opacity: Alan dolgusu opaklığı: - + Fill opacity: Opaklığı doldur: - + Areas Alanlar - - + + Use anti-aliasing Kenar yumuşatma kullan - + Waypoint color: Yer işareti rengi: - + Waypoint size: Yer işareti boyutu: - - + + Color: Renk: - - + + Size: Boyut: - + Waypoints Yer işaretleri - + POI color: POI renk: - + POI size: POI boyutu: - + POIs POI'ler - + + Line width: Hat genişliği: - + + Slider color: Kaydırıcı rengi: - + Background color: Arka plan rengi: - + Map opacity: Harita opaklığı: - + Paths Klasör konumları - + Points Noktalar - - + + Graphs Grafikler - + Map Harita - + Moving average window size Ortalama pencere boyutuna taşıma - - + + + Elevation: Rakım: - - + + + Speed: Hız: - + + Heart rate: Nabız: - + + Cadence: Kadans: - + + Power: Güç: - + + Smoothing Yumuşatma - + Eliminate GPS outliers Aykırı GPS ele - - Smoothing: - Yumuşatma: - - - + Automatic Otomatik - + mi/h mi/h - + kn kn - + km/h km/h - - + + s s - + Minimal speed: Asgari hız: - + Minimal duration: Minimum süre: - + Computed from distance/time Mesafe/zamandan hesaplandı - + Recorded by device Cihazdan kaydedilen - + Show secondary speed İkincil hızı göster - + GPS data GPS verisi - + DEM data DEM verisi - + Show secondary elevation İkincil rakımı göster - + UTC UTC - + Use segments Bölümleri kullan - + Time zone: Saat dilimi: - + Elevation Rakım - + Time zone Saat dilimi - + Filtering Filtreleme - + Sources Kaynaklar - + Pause detection Duraklama algılama - + Radius: Yarıçap: - + Speed Hız @@ -1520,201 +1525,204 @@ İz düşümü - - + + Custom Özel - + mi mi - + nmi nmi - + km Km - - + + POI POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG - + High-Resolution Yüksek çözünürlük - + The printed area is approximately the display area. The map zoom level does not change. Yazdırılan alan yaklaşık olarak görüntü alanıdır. Harita zum seviyesi değişmez. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Yakınlaştırma seviyesi, tüm içeriğin (izler/yer işaretleri) yazdırılan alana sığması ve harita çözünürlüğünün baskı çözünürlüğüne olabildiğince yakın olacak şekilde değiştirilecektir. - + Name Adı - + Date Tarih - + Distance Mesafe - + Time Zaman - + Moving time Hareket süresi - + Item count (>1) Öğe sayısı (>1) - + Separate graph page Ayrı grafik sayfası - + Print mode Yazdırma modu - + Header Başlık - + Use OpenGL OpenGL Kullan - + Enable HTTP/2 HTTP/2 etkinleştir - + MB MB - + + Image cache size: Görüntü önbellek boyutu: - + + Connection timeout: Bağlantı zaman aşımı: - - - + + + System Sistem - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. Dosya açma iletişim kutularının ilk yollarını seçin. Sistem öntanımlı değeri için alanı boş bırakın. - + Data: Veri: - + Maps: Haritalar: - + POI: POI: - + Initial paths İlk yollar - + Appearance Görünüm - + Maps Haritalar - + Data Veri - + DEM - + Print & Export Yazdır & Dışa ver - + Options Seçenekler diff --git a/lang/gpxsee_uk.ts b/lang/gpxsee_uk.ts index 88d22405..236721ab 100644 --- a/lang/gpxsee_uk.ts +++ b/lang/gpxsee_uk.ts @@ -1176,477 +1176,485 @@ HiDPI режим відображення - + Track width: Товщина треку: - + Track style: Стиль треку: - - + + Width: Товщина: - - + + Style: Стиль: - + Tracks Треки - + Route width: Товщина маршруту: - + Route style: Стиль маршруту: - + Routes Маршрути - + Area border width: Товщина межі області: - + Area border style: Стиль межі області: - + Area fill opacity: Непрозорість заливки області: - + Fill opacity: Непрозорість заливки: - + Areas Області - + + Base color: Основний колір: - + + Palette shift: Зміщення палітри: - - + + Use anti-aliasing Використовувати згладжування - + Waypoint color: Колір маршрутної точки: - + Waypoint size: Розмір маршрутної точки: - - + + Color: Колір: - - + + Size: Розмір: - + Waypoints Маршрутні точки - + POI color: Колір точки POI: - + POI size: Розмір точки POI: - + POIs Точки POI - + + Line width: Товщина лінії: - + + Slider color: Колір повзунка: - + Background color: Колір фону: - + Map opacity: Прозорість мапи: - + Paths Шляхи - + Points Точки - - + + Graphs Графіки - + Map Мапи - + Moving average window size Ширина ковзного вікна усереднення - - + + + Elevation: Висота: - - + + + Speed: Швидкість: - + + Heart rate: Пульс: - + + Cadence: Каденс: - + + Power: Потужність: - + + Smoothing Згладжування - + Eliminate GPS outliers Виключати GPS викиди - - Smoothing: - Згладжування: - - - + Automatic Автоматичне - - + + Custom Користувацьке - + mi/h миль/год - + kn вузол - + km/h км/год - - + + s с - + Minimal speed: Мінімальна швидкість: - + Minimal duration: Мінімальна тривалість: - + Computed from distance/time Обчислено з відстань/час - + Recorded by device Записано пристроєм - + Show secondary speed Показувати обидві одночасно - + GPS data GPS дані - + DEM data DEM дані - + Show secondary elevation Показувати обидві одночасно - + UTC UTC - + Use segments Використовувати сегменти - + Time zone: Часовий пояс: - + Speed Швидкість - + Elevation Висота - + Time zone Часовий пояс - + Filtering Фільтрування - + Sources Джерела - + Pause detection Виявлення пауз - + mi миля - + nmi мор.миля - + km км - + Radius: Радіус: - - + + POI Точки POI - + Use HTTP authentication - + Use $lat and $lon for NYY/SYY and EXXX/WXXX in the URL. - + + URL: - + Source - + WYSIWYG WYSIWYG (Візуальний редактор) - + High-Resolution Висока роздільна здатність - + The printed area is approximately the display area. The map zoom level does not change. Область друку є приблизною областю відображення. Рівень масштабування мапи не змінюється. - + The zoom level will be changed so that the whole content (tracks/waypoints) fits to the printed area and the map resolution is as close as possible to the print resolution. Масштаб буде змінено так, щоби весь зміст (треки/маршрутні точки) вмістився на друковану область, а роздільна здатність мапи була якомога наближеною до роздільної здатності друку. - + Name Ім’я - + Date Дата - + Distance Відстань - + Time Час - + Moving time Час руху - + Item count (>1) Кількість об’єктів (>1) - + Separate graph page Окрема сторінка із графіком - + Print mode Режим друку - + Header Заголовок - + Use OpenGL Використовувати OpenGL - + Enable HTTP/2 Дозволити HTTP/2 - + MB МБ - + + Image cache size: Розмір кешу зображень: - + + Connection timeout: Час з’єднання вичерпаний: - - - + + + System Система @@ -1666,57 +1674,57 @@ Проєкція - + Select the initial paths of the file open dialogues. Leave the field empty for the system default. - + Data: Дані: - + Maps: Мапи: - + POI: POI: - + Initial paths - + Appearance Зовнішній вигляд - + Maps Мапи - + Data Дані - + DEM - + Print & Export Друк та експорт - + Options Налаштування